Quickest Ribbon fiber fusion splicer

 Fast splicing time 11sec./tube heating time 18sec

 Self cladding alignment with melting surface tension

 Up to 12 fiber splicing

 Absolute Robustness

Real-time arc discharge control by analyzing the arc’s brightness intensity.

Automatic cleaver blade management by wireless communication data connectivity when the splicer judges the blade is worn.

Wireless link to ribbon fiber stripper to change settings to adequate one according to the ribbon fiber type to be spliced

Automated open-close wind protector and heater

Work tray with large capacity storage built in the carrying case

KEY FEATURES
 

Standard Package:

 Fusion splicer 88R

 AC adapter ADC-20

 AC power cord

 Battery Pack 

Carrying case

 Electrodes ELCT2-16B

 Hexagonal wrench

 V Groove cleaning brush

 Instruction manual CD

 Quick reference guide

 Alcohol pot

 Fiber holder

 Cleaver CT50

 Ribbon stripper RS03 and battery pack, adapter, power cord, blade cleaning brush.

 USB cable

Over view

 Applicable fibers : Single / SMF(G.652/657), MMF(G.651), DSF(G.653), NZDSF(G.655)

 Cladding dia./ Sheath dia.: 80-150μm / 100- 3000um

 Cleave length: 10mm with sheath clamp

 Splice mode/heating mode: Total 100 splice modes / 30 heating modes

 Typical splice loss : 0.05dB (SM), 0.02dB(MM), 0.08dB(DS) and 0.08dB(NZDS)

 Splice time: Typical 11sec

 Tube heating time: Typical 13sec

 Electrode life: 1500 splices

 Splice result storage: 20,000 splices

 Splice / Heat mode: 100/30

 Viewing methods / magnification : 5” color LCD. 20X magnification for 12 fiber and 60x for SMF

 Applicable protection sleeve: 60mm, 40mm, and Fujikura micro sleeves

 No. of splice/heating per battery full charge: Typical 165 cycles

 Electrode life: 5000 splices

 Operating condition : Altitude : 0 to 3,700m above sea level, Wind : 15m/sec, Temperature : -10 to 50deg C, Hμmidity : 0 to 95%RH, non-dew

 Automatic features: Splice mode select by fiber analysis, Discharge power calibration, Wind protector, heater lid, Heater clamp